Stone Tile Cleaning & Restoration Walberton

Limestone ultimately looses the original finish. This surface damage is brought on by foot traffic scratching and etch marks The only way to bring back the initial appearance is through polishing the floor. We use diamond polishing to re-surface a floor and restore the original appearance.

In the event that tiles are not really, perfectly even this disorder is referred to as "lippage". We can grind away the uneven edges of the tiles, making the tile surface flat. Limestone grinding is an expert process, that brings stunning results. The floor will look like a single piece of Limestone.

Following grinding, the grout sits is level with the Limestone tiles. After grinding honing and polishing cleaning is a piece of cake, because the mop slides over the floor. There will be no grout lines to capture soil. Cracks, chips and hole repairs tend to be an element of the Limestone restoration work. After we have assessed the floor, we will advise the best Limestone restoration process.

Find out moreabout our Limestone cleaning Walberton work plus our wide-ranging stone floor cleaning restoration systems or Book your free Quote

Slate flooring is among the most well known types of natural stone, since it calls for less maintenance and cleaning. Whilst slate has a minimal porosity, it's going to nevertheless partly absorb and oil based spills, leaving aggravating marks.

We use a mix of machine scrubbing and hand scrubbing to remove all traces of previous dirty sealers and clean the floor. After the professional cleaning is completed, then use specialised sealers that will last for years not months.

If you like a smooth finish, we are able to grind the floor, but we have to measure the slate before grinding.

Find out more about our Slate cleaning and sealing Walberton work including our substantial stone cleaning  options or Book a Quote

Period Geometric or Encaustic floor tiles are found in Victorian and Edwardian hallways.

Victorian tiles are manufactured from natural clay and have a natural non-shiny finish.

Along with the changes in home decor, many of these floors get carpet underlay, lino, bitumen and different sticky deposits.

Old polishes, waxes, paint spills and sealer remains can make cleaning these types of floors a challenge.

Following cleaning, a colour intensifying sealer is put on to revive the natural colours in the floor. The mat finish can be polished through the use of a wax or topical sealer.

Find outabout our Victorian Minton Tiles cleaning and sealing Walberton work as well as our extensive professional cleaningservice or Book a Quote

Porcelain is classified as a ceramic, but made with alternative materials than conventional glazes and clay tiles.

High quality Porcelain has really low porosity, this means less stains, less water damage, much less need for sealing.

If Porcelain is not produced properly, the surface can absorb soil similar to natural stone floors. If you've got an inferior Porcelain, the surface soil could be hard to remove.

We can remove embedded soil using equipment made to get into the microscopic pits where the soil is held.

Our Porcelain sealers can help stop further soil problems.

In the event that porcelain is a solid colour, we are able to resurface the porcelain, just like granite or Stone restoration.

Find out more about our Porcelain Tiles Cleaning Walberton floor restoration services including our substantial professional cleaning treatments or Book a Quote.

Natural tone floor cleaning is almost never cleaning alone, there is certainly commonly added restoration required. Natural stone floor restoration addresses a number of treatments. natural stone and tile floors suffer from foot traffic wear and damage, because individuals move over them. The most frequent problem we meet during stone restoration is oily soil trodden to the surface creating a dull, unappealing finish. Highly polished Stone tiles and granite floors show up deterioration quickly, as small traffic scuff marks on the surface change the shine and hold soil. Permeable natural stone and tile sealed with a film-forming surface sealer will steadily suffer from wear damage.

The vast majority of tile floors have grout lines. Soiled grout is a common problem to be reconciled on natural stone and tile floors. Cracks, chips and hole repairs will often be a part of the restoration process.

We get rid of acid etch marks and scratching by grinding and honing. Natural stone can be ground to show a brand new surface.